低氮燃燒器的技術性能

1、單段火、兩段火、兩段火漸進式/比例調節

1. Progressive/proportional adjustment for single fire, two fire and two fire

2、低氮燃燒器能適應任何類型的燃燒室。

2. The low-nitrogen burner can adapt to any type of combustion chamber.

3、空氣和燃氣在燃燒頭混合。

3. Air and gas are mixed in the combustion head.

4、低氮燃燒器通過調節燃燒空氣和燃燒頭，可以獲得最佳的燃燒參數。

4. The low-nitrogen burner can obtain the best combustion parameters by adjusting the combustion air and combustion head.

5、無須把燃燒器從鍋爐上拆下，就可直接取下混合裝置，從而可以方便的進行維修保養。

5. Without removing the burner from the boiler, the mixing device can be directly removed to facilitate maintenance.

6、低氮燃燒器采用伺服電動機來進行第一、二段空氣流量調節，并且當燃燒器停止運行時，風門關閉以減少爐內熱量損失。

6. The low-nitrogen burner adopts servo motor to adjust the air flow in the first and second sections, and when the burner stops running, the damper is closed to reduce the heat loss in the furnace.

7、可以給閥組加一個閥的密封控制裝置。

7. A valve seal control device can be added to the valve set.

8、低氮燃燒器采用一個法蘭和一個絕緣密封圈與鍋爐連接固定；配有一個4孔和7孔聯接器。

8. The low-nitrogen burner is fixed with a flange and an insulating seal ring. Equipped with a 4-hole and 7-hole connector.

9、低氮燃燒器根據要求可提供大于標準長度的鼓風管。

9. The low-nitrogen burner can provide a blast pipe greater than the standard length as required.